联
系
客
服
系
客
服
扫码留言
[1] M. Zahran, O. El-Mowafy, L. Tam, P. A. Watson, and Y. Finer, “Fracture strength and fatigue resistance of all-ceramic molar crowns manufactured with CAD/CAM technology,” Journal of Prosthodontics, vol. 17, no. 5, pp. 370–377, 2008.
[2] F. Beuer, D. Edelhoff, W. Gernet, and M. Naumann, “Effect of preparation angles on the precision of zirconia crown copings fabricated by CAD/CAM system,” Dental Materials Journal, vol. 27, no. 6, pp. 814–820, 2008.
[3] F. Beuer, M. Naumann, W. Gernet, and J. A. Sorensen, “Preci- sion of fit: zirconia three-unit fixed dental prostheses,” Clinical Oral Investigations, vol. 13, no. 3, pp. 343–349, 2009.
[4] A. Ode ́n, M. Andersson, I. Krystek-Ondracek, and D. Mag- nusson, “Five-year clinical evaluation of Procera AllCeram crowns,” The Journal of prosthetic dentistry, vol. 80, no. 4, pp. 450–456, 1998.
[5] S. Rinke, S. Scha ̈fer, K. Lange, N. Gersdorff, and M. Roediger, “Practice-based clinical evaluation of metal-ceramic and zirco- nia molar crowns: 3-year results,” Journal of Oral Rehabilitation, vol. 40, no. 3, pp. 228–237, 2013.
[6] Y. Zhang, J. J.-W. Lee, R. Srikanth, and B. R. Lawn, “Edge chip- ping and flexural resistance of monolithic ceramics,” Dental Materials, vol. 29, no. 12, pp. 1201–1208, 2013.
[7] T.-K. Kwon, H.-S. Pak, J.-H. Yang et al., “Comparative fracture strength analysis of lava and digident CAD/CAM zirconia ceramic crowns,” Journal of Advanced Prosthodontics, vol. 5, no. 2, pp. 92–97, 2013.
[8] R.G.Fonseca,F.deOliveiraAbi-Rached,J.M.dosSantosNunes Reis, E. Rambaldi, and P. Baldissara, “Effect of particle size on the flexural strength and phase transformation of an airborne- particle abraded yttria-stabilized tetragonal zirconia polycrystal ceramic,” Journal of Prosthetic Dentistry, vol. 110, no. 6, pp. 510– 514, 2013.
[9] I. Denry and J. R. Kelly, “State of the art of zirconia for dental applications,” Dental Materials, vol. 24, no. 3, pp. 299–307, 2008.
[10] F. Beuer, D. Edelhoff, W. Gernet, and J. A. Sorensen, “Three- year clinical prospective evaluation of zirconia-based posterior fixed dental prostheses (FDPs),” Clinical Oral Investigations, vol. 13, no. 4, pp. 445–451, 2009.
[11] Y.-S. Choi, S.-H. Kim, J.-B. Lee, J.-S. Han, and I.-S. Yeo, “In vitro evaluation of fracture strength of zirconia restoration veneered with various ceramic materials,” Journal of Advanced Prosthodontics, vol. 4, no. 3, pp. 162–169, 2012.
[12] W. S. Lin, C. Ercoli, C. Feng, and D. Morton, “The effect of core material, veneering porcelain, and fabrication technique on the biaxial flexural strength and weibull analysis of selected dental ceramics,” Journal of Prosthodontics, vol. 21, no. 5, pp. 353–362, 2012.
[13] P. Vigolo and S. Mutinelli, “Evaluation of zirconium-oxide- based ceramic single-unit posterior fixed dental prostheses (FDPs) generated with two CAD/CAM systems compared to porcelain-fused-to-metal single-unit posterior FDPs: a 5-year clinical prospective study,” Journal of Prosthodontics, vol. 21, no. 4, pp. 265–269, 2012.
[14] R. Sorrentino, G. de Simone, S. Tete`, S. Russo, and F. Zarone, “Five-year prospective clinical study of posterior three-unit zirconia-based fixed dental prostheses,” Clinical Oral Investiga- tions, vol. 16, no. 3, pp. 977–985, 2012.
̈
[15] A. Ortorp, M. L. Kihl, and G. E. Carlsson, “A 5-year retrospec-
tive study of survival of zirconia single crowns fitted in a private clinical setting,” Journal of Dentistry, vol. 40, no. 6, pp. 527–530, 2012.
[16] F. Beuer, M. Stimmelmayr, J.-F. Gueth, D. Edelhoff, and M. Naumann, “In vitro performance of full-contour zirconia single crowns,” Dental Materials, vol. 28, no. 4, pp. 449–456, 2012.
[17] B. Stawarczyk, M. O ̈ zcan, M. Roos, A. Trottmann, I. Sailer, and C.H.F.Ha ̈mmerle,“Load-bearingcapacityandfailuretypes of anterior zirconia crowns veneered with overpressing and layering techniques,” Dental Materials, vol. 27, no. 10, pp. 1045–1053, 2011.
[18] M. Dhima, D. A. Assad, J. E. Volz et al., “Evaluation of fracture
resistance in aqueous environment of four restorative systems for posterior applications. Part 1,” Journal of Prosthodontics, vol. 22, no. 4, pp. 256–260, 2013.
[19] N. R. F. A. Silva, V. P. Thompson, G. B. Valverde et al., “Com- parative reliability analyses of zirconium oxide and lithium dis- ilicate restorations in vitro and in vivo,” Journal of the American Dental Association, vol. 142, supplement 2, pp. 4S–9S, 2011.
[20] B. D. Flinn, D. A. Degroot, L. A. Mancl, and A. J. Raigrod- ski, “Accelerated aging characteristics of three yttria-stabilized tetragonal zirconia polycrystalline dental materials,” Journal of Prosthetic Dentistry, vol. 108, no. 4, pp. 223–230, 2012.
[21] T. F. Alghazzawi, J. Lemons, P.-R. Liu, M. E. Essig, A. A. Bartolucci, and G. M. Janowski, “Influence of low-temperature environmental exposure on the mechanical properties and structural stability of dental zirconia,” Journal of Prosthodontics, vol. 21, no. 5, pp. 363–369, 2012.
[22] J. Chevalier, L. Gremillard, A. V. Virkar, and D. R. Clarke, “The tetragonal-monoclinic transformation in zirconia: lessons learned and future trends,” Journal of the American Ceramic Society, vol. 92, no. 9, pp. 1901–1920, 2009.
[23] P. Fabbri, C. Piconi, E. Burresi, G. Magnani, F. Mazzanti, and C. Mingazzini, “Lifetime estimation of a zirconia-alumina com- posite for biomedical applications,” Dental Materials, vol. 30, no. 2, pp. 138–142, 2014.
[24] J.Chevalier,“Whatfutureforzirconiaasabiomaterial?”Bioma- terials, vol. 27, no. 4, pp. 535–543, 2006.
[25] J. Chevalier, J. Loh, L. Gremillard, S. Meille, and E. Adolfson, “Low-temperature degradation in zirconia with a porous sur- face,” Acta Biomaterialia, vol. 7, no. 7, pp. 2986–2993, 2011.
[26] C. Sanon, J. Chevalier, T. Douillard et al., “Low temperature degradation and reliability of one-piece ceramic oral implants with a porous surface,” Dental Materials, vol. 29, no. 4, pp. 389– 397, 2013.
[27] H. P. Papanagiotou, S. M. Morgano, R. A. Giordano, and R. Pober, “In vitro evaluation of low-temperature aging effects and finishing procedures on the flexural strength and structural sta- bility of Y-TZP dental ceramics,” Journal of Prosthetic Dentistry, vol. 96, no. 3, pp. 154–164, 2006.
[28] K. Kvam and S. Karlsson, “Solubility and strength of zirconia- baseddentalmaterialsafterartificialaging,”JournalofProsthetic Dentistry, vol. 110, no. 4, pp. 281–287, 2013.
[29] V. Preis, M. Behr, S. Hahnel, G. Handel, and M. Rosentritt, “In vitro failure and fracture resistance of veneered and full-contour zirconia restorations,” Journal of Dentistry, vol. 40, no. 11, pp. 921–928, 2012.
[30] P.Proussaefs,“Crownscementedoncrownpreparationslacking geometric resistance form. Part II: effect of cement,” Journal of Prosthodontics, vol. 13, no. 1, pp. 36–41, 2004.
[31] M.A.Ablal,J.S.Kaur,L.Cooperetal.,“Theerosivepotentialof some alcopops using bovine enamel: an in vitro study,” Journal of Dentistry, vol. 37, no. 11, pp. 835–839, 2009.
[32] J. O. Burgess, S. Janyavula, N. C. Lawson, T. J. Lucas, and D. Cakir, “Enamel wear opposing polished and aged zirconia,” Operative Dentistry, vol. 39, no. 2, pp. 189–194, 2014.
[33] M.N.Aboushelib,“Simulationofcumulativedamageassociated with long term cyclic loading using a multi-level strain accom- modating loading protocol,” Dental Materials, vol. 29, no. 2, pp. 252–258, 2013.
[34] E. C. Teixeira, J. R. Piascik, B. R. Stoner, and J. Y. Thomp- son, “Dynamic fatigue and strength characterization of three ceramic materials,” Journal of Materials Science: Materials in Medicine, vol. 18, no. 6, pp. 1219–1224, 2007.
[35] L. Kontos, C. Schille, E. Schweizer, and J. Geis-Gerstorfer, “Influence of surface treatment on the wear of solid zirconia,” Acta Odontologica Scandinavica, vol. 71, no. 3-4, pp. 482–487, 2013.
[36] P. Luangruangrong, N. B. Cook, A. H. Sabrah, A. T. Hara, and M. C. Bottino, “Influence of full-contour zirconia surface roughness on wear of glass-ceramics,” Journal of Prosthodontics, vol. 23, no. 3, pp. 198–205, 2014.
[37] M.-J. Kim, S.-H. Oh, J.-H. Kim et al., “Wear evaluation of the human enamel opposing different Y-TZP dental ceramics and other porcelains,” Journal of Dentistry, vol. 40, no. 11, pp. 979– 988, 2012.
[38] S. Janyavula, N. Lawson, D. Cakir, P. Beck, L. C. Ramp, and J. O. Burgess, “The wear of polished and glazed zirconia against enamel,” Journal of Prosthetic Dentistry, vol. 109, no. 1, pp. 22– 29, 2013.
[39] Y.S.Jung,J.W.Lee,Y.J.Choi,J.S.Ahn,S.W.Shin,andJ.B. Huh, “A study on the in-vitro wear of the natural tooth structure by opposing zirconia or dental porcelain,” Journal of Advanced Prosthodontics, vol. 2, no. 3, pp. 111–115, 2010.
[40] M. Ghazy, O. El-Mowafy, and R. Roperto, “Microleakage of porcelain and composite machined crowns cemented with self- adhesive or conventional resin cement,” Journal of Prosthodon- tics, vol. 19, no. 7, pp. 523–530, 2010.
[41] V. Preis, M. Behr, C. Kolbeck, S. Hahnel, G. Handel, and M. Rosentritt, “Wear performance of substructure ceramics and veneering porcelains,” Dental Materials, vol. 27, no. 8, pp. 796– 804, 2011.̈
[42] B. Stawarczyk, M. Ozcan, F. Schmutz, A. Trottmann, M. Roos,
and C. H. F. Ha ̈mmerle, “Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists,” Acta Odontologica Scandinavica, vol. 71, no. 1, pp. 102–112, 2013.
[43] C. H. Gibbs, K. J. Anusavice, H. M. Young, J. S. Jones, and J. F. Esquivel-Upshaw, “Maximum clenching force of patients with moderate loss of posterior tooth support: a pilot study,” Journal of Prosthetic Dentistry, vol. 88, no. 5, pp. 498–502, 2002.
[44] V. F. Ferrario, C. Sforza, G. Zanotti, and G. M. Tartaglia, “Maximal bite forces in healthy young adults as predicted by surface electromyography,” Journal of Dentistry, vol. 32, no. 6, pp. 451–457, 2004.
暂无评论
请选择购买类型
已成功加入购物车
