联
系
客
服
系
客
服
扫码留言
1. Boitelle P, Mawussi B, Tapie L, Fromentin O. A systematic review of CAD/CAM fit restoration evaluations. J Oral Rehabil 2014;41:853–874.
2. Van Noort R. The future of dental devices is digital. Dent Mater 2012;28:3–12.
3. Yuzbasioglu E, Kurt H, Turunc R, Bilir H. Comparison of digital and conventional impresision techniques: Evaluation of patients’ percep tion, treatment comfort, effectiveness and clinical outcomes. BMC Oral Health 2014;14:10.
4. Alghazzawi TF. Advancements in CAD/CAM technology: Options for practical implementation. J Prosthodont Res 2016;60:72–84.
5. Kim JH, Jeong JH, Lee JH, Cho HW. Fit of lithium disilicate crowns fabri cated from conventional and digital impressions assessed with micro-CT. J Prosthet Dent 2016;116:551–557.
6. Lee JJ, Jeong ID, Park JY, Jeon JH, Kim JH, Kim WC. Accuracy of single abutment digital cast obtained using intraoral and cast scanners. J Prosthet Dent 2017;117:253–259
7. Dahl BE, Dahl JE, Ronøld HJ. Digital evaluation of marginal and internal fit of single-crown fixed dental prostheses. Eur J Oral Sci 2018;126:512–517.
8. Beuer F, Schweiger J, Edelhoff D. Digital dentistry: An overview of recent developments for CAD/CAM generated restorations. Br Dent J 2008;204:505–511.
9. McLean JW, von Fraunhofer JA. The estimation of cement film thickness by an in vivo technique. Br Dent J 1971;131:107–111.
10. Hung SH, Hung KS, Eick JD, Chappell RP. Marginal fit of porcelain fused-to-metal and two types of ceramic crown. J Prosthet Dent 1990;63:26–31.
11. Holmes JR, Sulik WD, Holland GA, Bayne SC. Marginal fit of castable ceramic crowns. J Prosthet Dent 1992;67:594–599.
12. Reich S, Gozdowski S, Trentzsch L, Frankenberger R, Lohbauer U. Mar ginal fit of heat-pressed vs CAD/CAM processed all-ceramic onlays using a milling unit prototype. Oper Dent 2008;33:644–650.
13. Liang S, Yuan F, Luo X, Yu Z, Tang Z. Digital evaluation of absolute marginal discrepancy: A comparison of ceramic crowns fabricated with conventional and digital techniques. J Prosthet Dent 2018;120:525–529.
14. Baig MR, Tan KB, Nicholls JI. Evaluation of the marginal fit of a zirconia ceramic computer-aided machined (CAM) crown system. J Prosthet Dent 2010;104:216–227.
15. Keshvad A, Hooshmand T, Asefzadeh F, Khalilinejad F, Alihemmati M, Van Noort R. Marginal gap, internal fit, and fracture load of leucite reinforced ceramic inlays fabricated by CEREC inLab and hot-pressed techniques. J Prosthodont 2011;20:535–540.
16. Schaefer O, Kuepper H, Sigusch BW, Thompson GA, Hefti AF, Guentsch A. Three-dimensional fit of lithium disilicate partial crowns in vitro. J Dent 2013;41:271–277.
17. Prudente MS, Davi LR, Nabbout KO, et al. Influence of scanner, powder application, and adjustments on CAD-CAM crown misfit. J Prosthet Dent 2018;119:377–383.
18. Denissen H, Dozic´ A, van der Zel J, van Waas M. Marginal fit and short term clinical performance of porcelain-veneered CICERO, CEREC, and Procera onlays. J Prosthet Dent 2000;84:506–513.
19. Krifka S, Anthofer T, Fritzsch M, Hiller KA, Schmalz G, Federlin M. Ce ramic inlays and partial ceramic crowns: Influence of remaining cusp wall thickness on the marginal integrity and enamel crack formation in vitro. Oper Dent 2009;34:32–42.
20. Vanlioglu BA, Evren B, Yildiz C, Uludamar A, Ozkan YK. Internal and marginal adaptation of pressable and computer-aided design/computer-assisted manufacture onlay restorations. Int J Prosthodont 2012;25:262–264.
21. Uzgur R, Ercan E, Uzgur Z, Çolak H, Yalçın M, Özcan M. Cement thick ness of inlay restorations made of lithium disilicate, polymer-infiltrated ceramic and nano-ceramic CAD/CAM materials evaluated using 3D x-ray micro-computed tomography. J Prosthodont 2018;27:456–460.
22. Alajaji NK, Bardwell D, Finkelman M, Ali A. Micro-CT evaluation of ceramic inlays: Comparison of the marginal and internal fit of five and three axis CAM systems with a heat press technique. J Esthet Restor Dent 2017;29:49–58.
23. Mormann WH, Curilovıc´ Z. CEREC(R) CAD-CAM ceramic restorations. A case report after 5 years in place. Acta Stomatol Croat 1991;25:3–10.
24. Mörmann W, Krejci I. Computer-designed inlays after 5 years in situ: Clinical performance and scanning electron microscopic evaluation. Quintessence Int 1992;23:109–115.
25. Mörmann WH. The evolution of the CEREC system. J Am Dent Assoc 2006;137(suppl):s7–s13.
26. Da Costa JB, Pelogia F, Hagedorn FB, Ferracane JL. Evaluation of different methods of optical impression making on the marginal gap of onlays created with CEREC 3D. Oper Dent 2010;35:324–329.
27. Martin N, Jedynakiewicz NM. Clinical performance of CEREC ceramic inlays: A systematic review. Dent Mater 1999;15:54–61.
28. Neves FD, Prado CJ, Prudente MS, et al. Micro-computed tomography evaluation of marginal fit of lithium disilicate crowns fabricated by using chairside CAD/CAM systems or the heat-pressing technique. J Prosthet Dent 2014;112:1134–1140.
29. Boeddinghaus M, Breloer ES, Rehmann P, Wöstmann B. Accuracy of single-tooth restorations based on intraoral digital and conventional impressions in patients. Clin Oral Investig 2015;19:2027–2034.
30. Mehl A, Ender A, Mörmann W, Attin T. Accuracy testing of a new intra oral 3D camera. Int J Comput Dent 2009;12:11–28.
31. Kurz M, Attin T, Mehl A. Influence of material surface on the scan ning error of a powder-free 3D measuring system. Clin Oral Investig 2015;19:2035–2043.
32. Shim JS, Lee JS, Lee JY, Choi YJ, Shin SW, Ryu JJ. Effect of software
version and parameter settings on the marginal and internal adapta tion of crowns fabricated with the CAD/CAM system. J Appl Oral Sci 2015;23:515–522.
33. Contrepois M, Soenen A, Bartala M, Laviole O. Marginal adaptation of ceramic crowns: A systematic review. J Prosthet Dent 2013;110:447–454.e10.
34. Renne W, Ludlow M, Fryml J, et al. Evaluation of the accuracy of 7 digital scanners: An in vitro analysis based on 3-dimensional comparisons. J Prosthet Dent 2017;118:36–42.
暂无评论
请选择购买类型
已成功加入购物车
